Ritz GmbH Electrical Maschines and Device ManufacturingAddress:
Stripping enamelled round wires and flat copper with a diameter/thickness between 0,15mm and 6mm.
After three decisions, you will know what device suits to your needs:
Device Type | Hand Held Device Stationary Machine | ||
Wire Diameter | 0.15mm - 3mm | 1mm - 6mm | 1mm - 8mm |
Brush Diameter | 30mm | 35mm | 40mm |
Brush Rotation | counter rotation pulls the wire |
same rotation no force on the wire |
same rotation no force on the wire |
Exhaust Adapter | with (SA) without |
All ABISOBRUSH devices strip the wire between two rotating brushes. The brushes' distance can be infinitely adjusted to the wire thickness by turning a setscrew. The HQ35P, ST35 or ST40 are designed to strip thick wire. In this case no force should be applied on the wire and hence both brushes rotatate the same way in all those devices. However the HQ30's brushes counter rotate and pull the wire into the stripping device. By using different types of brushes the stripping quality can be adjusted the wire diameter and the isolation material.
Push the wire in the ABISOBRUSH, turn the wire by 90 degree and pull it out again. Done. The wire can also be stripped in the between by inserting the wire laterally.
|
|||||||
|
|||||||
|
|||||||
|
|||||||
|